2-40
Keys and doors
& Moonroof switches
! Tilting moonroof
NOTE
One-touch operation does not take
place when the moonroof is lowered.
Press the switch continuously to lower
the moonroof.
! Sliding moonroof
To stop the moonroof at a selected midway position while opening or closing it,
momentarily press the front side or rear
side of the switch.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.
NOTE
For the sake of safety, it is recommended that you avoid driving with the
moonroof fully opened.
1)
2)
Raise
Lower
The raising function will only operate when
the moonroof is fully closed. The lowering
function will only operate when the moonroof is raised.
Press the rear side of the “UP/DOWN”
switch to raise the moonroof.
Press the front side of the “UP/DOWN”
switch to lower the moonroof.
Release the switch after the moonroof has
been raised or has been lowered completely. Pressing the switch continuously
may cause damage to the moonroof.
1)
2)
Open
Close
Press the rear side of the “OPEN/CLOSE”
switch to open the moonroof. The sun
shade will also be opened together with
the moonroof. For Outback, the moonroof
will stop at a position approximately 0.8 in
(2 cm) away from the fully opened position. Press the switch again to open the
moonroof completely.
Press the front side of the “OPEN/CLOSE”
switch to close the moonroof.
! Anti-entrapment function
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves back to the fully open
position and stops there. The anti-entrapment function may also be activated by a
strong shock on the moonroof even when
there is nothing trapped.
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.