1-34
Seat, seatbelt and SRS airbags
! Outback
! To hook the top tether
CAUTION
Always remove the head restraint
when mounting a child restraint
system with a top tether. Failure to
do so may prevent the top tether
from being fastened tightly.
restraint while pressing the release button.
Store the head restraint in the trunk. Avoid
placing the head restraint in the passenger compartment to prevent it from being
thrown around in the passenger compartment in a sudden stop or a sharp turn.
! Legacy
Three tether anchorages, i.e., ones for the
right, center and left positions, are already
installed on the rear edge of the roof.
Open the cover flap to use each anchorage.
1. Fold down the rear seatback for the
window side seating position. Refer to
“Folding down the rear seatback” F1-9.
3. Open the cover flaps to use the
anchorages.
2. Remove the head restraint at the
seating position where the child restraint
system has been installed with the seatbelt or lower anchorages; lift up the head