Instruments and controls
! Remote control mirror switch
The remote control mirrors operate only
when the ignition switch is in the “ON” or
“Acc” position.
1. Turn the knob to the “L” side to adjust
the left-hand mirror or to the “R” side to
adjust the right-hand mirror.
2. Move the knob in the direction you
want to move the mirror.
3. Return the knob to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manually.
! Power folding mirror switch (if
equipped)
The power folding mirror switch operates
only when the ignition switch is in the “ON”
or “Acc” position.
To fold the outside mirrors, push the power
folding mirror switch. To unfold the mirrors,
push the switch again.
NOTE
. When the temperature is low, the
outside mirrors may stop during operation. Push the switch again. When the
outside mirrors do not work by operating the switch, move the outside mirrors several times manually. This
makes it possible to operate them by
switch operation.
. When you operate the power folding
3-51
mirror switch continuously, it may not
work. This is not a malfunction. Operate after waiting for a short period of
time.
. When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by operating the switch again.