11-22
Maintenance and service
! Turbo models
the air intake duct.
2. Remove the hydraulic hose from the
clip on the right side of the air cleaner
case.
3. Unsnap the two clamps holding the air
cleaner case cover.
6. If the air cleaner case has been
removed, insert the three projections on
the air cleaner case into the slits on the air
cleaner case cover.
7. Install the removed parts in the reverse
order of removal.
4. Open the air cleaner case and remove
the air cleaner element.
5. Clean the inside of the air cleaner case
and case cover with a damp cloth and
install a new air cleaner element.
1)
2)
3)
Air intake duct
Air cleaner case
Clamp
1. Remove the hydraulic hose in the
power steering system from the clip on