Subaru Legacy Manuals 2011 Legacy Owner's Manual | Page 113

Keys and doors & Power window operation by driver ! Operating the driver’s window ! Driver’s side power window switches 2-21 held. For some models, this switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch. Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, press the switch down lightly. NOTE 1) 2) 1) 2) 3) 4) 5) Lock switch For driver’s window For front passenger’s window For rear left passenger’s window For rear right passenger’s window All door windows can be controlled by the power window switch cluster at the driver side door. Automatically open/close Open/close To open: Press the switch down lightly and hold it. The window will open as long as the switch is held. This switch also has a one-touch auto down function that allows the window to be opened fully without holding the switch. Press the switch down until it clicks and release it, and the window will fully open. To stop the window halfway, pull the switch up lightly. To close: Pull the switch up lightly and hold it. The window will close as long as the switch is If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initialize the power window to reactivate the one-touch auto up/down function. Refer to “Initialization of power window” F2-23. ! Anti-entrapment function CAUTION . Never attempt to test this function using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if some object gets trapped just before the window fully closes. – CONTINUED –