Maintenance and service
11-57
4. Install the bulb socket by turning it
clockwise.
5. Install the light cover on the rear gate.
& License plate light
! Legacy
NOTE
It may be difficult to replace the bulbs.
We recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
1)
2)
Back-up light
Tail light
1. Open the trunk.
2. Turn the bulb socket counterclockwise
and remove it.
3. Turn the bulb socket counterclockwise
and remove it.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Install the bulb socket by turning it
clockwise.
6. Reinstall the trunk trim lining.
2. Remove the trunk trim lining by removing the 12 clips and the trunk trim
handle.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
– CONTINUED –