Replacing Bulbs 469 |
||||||||
2. Turn the bulb socket counterclockwise and remove it. |
||||||||
|
11. Tighten the upper and lower screws. 12. Reinstall the side cover.
& Back-Up Light s11be50
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.
|
1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim. |
3. Pull the bulb out of the bulb socket and replace it with a new one.
4. Install the bulb socket by turning it clockwise.
5. Install the light cover on the rear gate.
|
Maintenance and Service |
|||||
11 |
||||||||
– CONTINUED – |