OTHER SETTINGS
2. |
When installation is complete, select |
OK( OK) on the |
|
confirmation message. |
|
� If the update procedure fails, refer to the“ TROUBLESHOOTING” section.( �P. 250)
3. Turn the ignition switch to the“ LOCK”/“ OFF” position and exit the vehicle.
4. Close the driver’ s door and lock the doors, then move at least 10 feet( 3 m) away from the vehicle to prevent the key from interfering.
5. After at least 5 minutes have elapsed, start the engine again. � The new software will be applied.
SOUND SET
1. |
Display the ho |
2. |
Select Settin |
3. |
� Sound( S |
4. |
Select the item |
SOUND SETT
102