64
Child Restraint Systems
Booster cushion
1 . Adjust the head restraint as follows . For booster seat :
If the booster seat makes contact with the head restraint , perform the following procedure .
– Except rear center seat : Remove the head restraint .
– Rear center seat : Raise the head restraint to the extended position . If the booster seat still makes contact , install the child restraint system in a seating position other than the rear center seat .
For details , refer to “ Head Restraint Adjustment ” FP37 .
CAUTION
Store the removed head restraint in the cargo area . Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn .
For booster cushion :
Raise the head restraint to the extended position ( center seat ). Do not remove the head restraint .
2 . Place the booster seat / cushion and then sit the child on it . The child should sit well back on the booster seat / cushion .
3 . Run the lap and shoulder belt following the instructions provided by its manufacturer . For booster seat / cushion with a belt guide , use the seatbelt through the belt guide .
4 . Insert the tongue plate into the buckle until you hear a click . Take care not to twist the seatbelt . Make sure the shoulder belt is positioned across the center of child ’ s shoulder and that the lap belt is positioned as low as possible on the child ’ s hips .