42
Seatbelts
pull it out more slowly.
. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again.
! Adjusting the front seat shoulder belt anchor height s01ae060101
4. Insert the tongue plate into the buckle until you hear a click.
5. To tighten the lap part, pull up on the shoulder belt.
6. Place the lap belt as low as possible on the hips, not on the waist.
Adjust the shoulder belt anchor height to the position best suited for the driver / front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck.
To raise:
Pull the release knob and slide the anchor up.
To lower:
Pull the release knob and slide the anchor down.
Pull down on the anchor to make sure that it is locked in place.