|
5. When the keyless access with pushbutton start system is deactivated, press the push-button ignition switch with the brake pedal released. The status of the push-button ignition switch then changes to“ ON”.
NOTE
If the power does not switch even though the above procedure was followed precisely, contact your SUBARU dealer.
& Starting Engine s09ap03
1. Apply the parking brake.
2. Place the select lever in the“ P” position.
3. Depress the brake pedal.
|
4. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime( ding) will sound. At the same time, the push-button ignition switch turns to the“ ACC” or“ ON” position.
5. After the push-button ignition switch turns to the“ ACC” or“ ON” position, while depressing the brake pedal, press the push-button ignition switch.
NOTE
If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer.
|
9-9. Rear Gate – If the Rear Gate Cannot Be Opened
s09ag
In the event that you cannot open the rear gate by pressing the rear gate opener button, you can open it from inside the cargo area.
|
In Case of Emergency |
||
1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Remove the access cover at the bottom-center of the rear gate trim using flat-head screwdriver. |
9 |
||||
– CONTINUED – |