Flat Tires 411 |
the sealant, allergy symptoms may occur. |
. Stop the vehicle again, check and, if necessary, adjust the pressure of the damaged tire.
. After that, you can continue to drive carefully no faster than 50 mph( 80 km / h) and within the maximum distance of 125 miles( 200 km).
|
|||||
|
1 Expiration date
CAUTION
Replace the sealant bottle with a new one before the expiration date passes.
|
Inform all other users of the vehicle that the tire has been temporarily sealed with the flat tire repair kit and make them aware of the special driving conditions to be observed. |
1 Valve |
2. Connect the air compressor hose to the valve on the bottle.
CAUTION
. Make sure that the air compressor switch is OFF.
. The sealant may leak if the fitting is not tight enough.
|
In Case of Emergency
9
|
||
|
! How to seal the flat tire s09ac0302
To seal the flat tire, perform the following steps.
. First, pump in the sealant and air. Drive the vehicle for approximately 10 minutes or 3 miles( 5 km) so that the sealant can seal the damaged area.
|
1. Shake the sealant bottle well. Loosen the hose. |
|||||
– CONTINUED – |