|
the Reverse Automatic Braking( RAB) setting will revert to the state that was set before the ignition switch was turned off.
. When you turn the ignition switch off, the Sonar Audible Alarm ON / OFF settings will always reset, and the system will not store the settings of the function. Therefore, every time you turn the ignition switch to the“ ON” position, the Sonar Audible Alarm will turn on automatically.
Also, the following settings can be changed by operating the center information display.
. Warning volume. Sonar Audible Alarm
For details, refer to“ Car settings” FP201.
|
& RAB Warning Indicator
1 RAB malfunction message 2 RAB warning indicator
s07bn07
|
If the Reverse Automatic Braking( RAB) system malfunctions, the above indicator illuminates on the combination meter. Contact the nearest SUBARU dealer for details. |
& Handling of the Sonar Sensors s07bn06
The 4 sonar sensors are located in the rear bumper. To ensure the proper operation of the Reverse Automatic Braking( RAB) system, observe the following precautions.
. Do not affix any stickers or other items on the sonar sensor or the rear bumper surface.
. Always keep the sonar sensor and the rear bumper surface clean.
. Do not modify rear bumper.. Do not paint the rear bumper.
. Do not apply high pressure water to the sonar sensors with a high pressure carwashing machine.
|
7
Starting and Operating
|
|||
– CONTINUED – |