Subaru Impreza Manuals 2025 Impreza Owner's Manual | Page 369

BSD / RCTA 361
. The radar sensors may not detect or may have difficulty detecting the following vehicles and objects. – Small motorcycles, bicycles, pedestrians, stationary objects on the road or road side, etc.
– Vehicles with body shapes that the radar may not reflect( vehicles with lower body height such as a trailer with no cargo and sports cars)
– Vehicles that are not approaching your vehicle even though they are in the detection area( either on a neighboring lane to the rear or beside your vehicle when reversing)( The system determines the presence of approaching vehicles based on data detected by the radar sensors.) – Vehicles traveling at significantly different speeds
– Vehicles driving in parallel at almost the same speed as your vehicle for a prolonged time – Oncoming vehicles – Vehicles in a lane beyond the neighboring lane – Vehicles traveling at a significantly lower speed that you are trying to overtake
. On a road with extremely narrow lanes, the system may detect vehicles driving in a lane next to the neighboring lane.
& BSD / RCTA Approach Indicator Light / Warning Buzzer s07bm03
While the BSD / RCTA is active, the following item( s) will operate to alert the driver:
. The BSD / RCTA approach indicator light( when there are vehicles in the neighboring lanes).
. The BSD / RCTA approach indicator light and warning buzzer( when a vehicle is approaching from the left or right side while your vehicle is reversing)
! BSD / RCTA approach indicator light s07bm0301
BSD / RCTA approach indicator light
It is mounted on each side of the outside mirrors.
The indicator light will illuminate when a vehicle approaching from behind is detected.
The indicator light will flash to warn the driver of dangers under the following conditions.
. While the indicator light is illuminating, if the turn signal lever is operated toward the side in which this light turned on
. When reversing the vehicle while the system detects a vehicle approaching from either side
7
Starting and Operating
– CONTINUED –