Hill Start Assist System 347 |
|
7-16. Hill Start Assist System
s07au
|
. When the vehicle has stopped with the brake pedal depressed. |
|||||
|
CAUTION
. The Hill start assist system is a device only for helping the driver to START the vehicle on an uphill grade. To prevent accidents when the vehicle is parked on a slope, be sure to firmly set the parking brake. When setting the parking brake, make sure that the vehicle remains stationary when the brake pedal is released.
. Do not turn the ignition switch to the“ OFF” position while the Hill start assist system is operating. The Hill start assist system will deactivate, causing an accident.
The Hill start assist system is a device to make the following vehicle operations easier.
NOTE
. The Hill start assist system will activate when the Auto Vehicle Hold function is deactivated.
. The Hill start assist system will deactivate when the Auto Vehicle Hold function is activated.
|
1 Starting forward facing uphill 2 Starting backward facing downhill A Brake pedal
In both these cases, the Hill start assist system operates under the following condition.
|
Braking power is maintained temporarily( for approximately 2 seconds) by the Hill start assist system after the brake pedal is released. The driver is therefore able to start the vehicle in the same way as on a level grade, just using the accelerator pedal.
If the braking power of the Hill start assist system is insufficient after the brake pedal is released, apply more braking power by depressing the brake pedal again.
The Hill start assist system may not operate on slight grades. Also, the Hill start assist system does not operate in the following cases.
|
7
Starting and Operating
|
|||
– CONTINUED – |