344
Parking Your Vehicle
! To turn on / off the Auto Vehicle Hold function s07ap030501
Auto Vehicle Hold indicator light
To turn the Auto Vehicle Hold function on and off, operate the center information display. Refer to“ Auto Vehicle Hold( AVH) ON / OFF icon” FP192( 11.6-inch display models) or“ Vehicle setting icons” FP219( dual 7.0-inch display models).
When the Auto Vehicle Hold function is turned ON, the Auto Vehicle Hold indicator light will turn on.
NOTE
. When the electronic parking brake system has a malfunction while the Auto Vehicle Hold function is turned on, a chirp will sound, the Auto Vehicle Hold indicator light will turn
off and the brake system warning light will turn on.
. Every time when starting the engine, the Auto Vehicle Hold function will be set to“ OFF”.
! To operate the Auto Vehicle Hold function s07ap030503
Stop the vehicle by depressing the brake pedal when all of the following conditions are met. Then the Auto Vehicle Hold function will operate.
. Driver’ s door is closed.. The driver’ s seatbelt is fastened.
. The select lever is in a position other than the“ P” position.
Auto Vehicle Hold indicator light
While the vehicle is kept stopped by the Auto Vehicle Hold function, the Auto Vehicle Hold indicator light will flash.
! To release the Auto Vehicle Hold function s07ap030504
Perform any of the following operations to release the Auto Vehicle Hold function.
. Depress the accelerator pedal.. Depress the brake pedal again.. Apply the electronic parking brake.
. Shift the select lever to the“ P” position with the brake pedal pressed.
. Deactivate the Auto Vehicle Hold function operating with the center information display while depressing the brake pedal.
When the Auto Vehicle Hold function is released, the Auto Vehicle Hold indicator light will change from flashing to illuminated.
Under any of the following conditions, the Auto Vehicle Hold function will be automatically released and the electronic parking brake will be automatically applied.
. The Auto Vehicle Hold function has been in operation for 10 minutes.
. The driver’ s seatbelt is unfastened.. The ignition switch is turned to the