242
Wiper and Washer
! Windshield washer s03am0104
To wash the windshield, pull the wiper control lever toward you. The washer fluid sprays until you release the lever. The wipers operate while you pull the lever.
Windshield washer fluid warning light
NOTE
The windshield washer fluid warning light appears when the washer fluid level in the tank has dropped to the lower limit. If the warning light appears, refill the tank with fluid. For the tank refilling method, refer to“ Windshield Washer Fluid” FP472.
& Rear Window Wiper and Washer Switch s03am02
The wiper operates only when the ignition switch is in the“ ON” position.
: Washer( accompanied by wiper operation): Continuous: Intermittent
OFF: Off: Washer( accompanied by wiper operation)
! Rear wiper s03am0201
To turn the rear wiper on, turn the knob switch upward.
To turn the wiper off, return the knob switch to the“ OFF” position.
With the switch turned to the“” position, the rear wiper will operate intermittently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the“ R” position, the rear wiper will switch to continuous operation. When you move the select lever from the“ R”( reverse) position to another position, the rear wiper will return to intermittent operation.
Reverse gear interlocked rear wiper:
Even if the rear wiper switch is in the“ OFF” position, if the front windshield wiper is operating continuously, the rear wiper will operate intermittently when you move the select lever to the“ R”( reverse) position.
The factory setting( default setting) of the reverse gear interlocked rear wiper is as follows.
. U. S.-spec. models: Non-operational. Other models: Operational
This setting can be changed by a SUBARU dealer. We recommend that you consult your SUBARU dealer for details.