140
Moonroof
& Moonroof Switches
! Tilting moonroof
1 Up 2 Down s02ak02
s02ak0201
To raise the moonroof, press and hold the switch in the up side and release. To lower the moonroof, press and hold the switch in the down side.
NOTE
Release the switch after the moonroof has been raised or has been lowered completely. Pressing the switch continuously may cause damage to the moonroof.
! Sliding moonroof
1 Open 2 Close s02ak0202
Opening the moonroof:
To open the moonroof using the automatic function, press and hold the open side of the switch and then release it.
To stop the moonroof at a selected midway position while opening it, momentarily press the open or close side of the switch.
The sunshade will also be opened together with the moonroof. The moonroof will stop at a position approximately 0.6 in( 1.5 cm) away from the fully opened position.
Press the open side of the switch again to open the moonroof completely.
Closing the moonroof:
To close the moonroof using the automatic function, press and hold the close side of the switch and then release it.
To stop the moonroof at a selected midway position while closing it, momentarily press the open or close side of the switch.
NOTE
. After washing the vehicle or after it rains, wipe away water on the roof prior to opening the moonroof to prevent drops of water from falling into the passenger compartment.
. Driving with the moonroof fully open can cause an annoying sound to be generated at high speeds. If this occurs, use the moonroof at the initial stop position of 0.6 in( 1.5 cm) away from the fully opened position.
. For the sake of safety, it is recommended that you avoid driving with the moonroof fully opened.
! Anti-entrapment function s02ak0203
When the moonroof senses a substantial enough object trapped between its glass and the vehicle’ s roof during closure, it automatically moves back to the fully open position and stops there. The anti-entrapment function may also be activated by a