|
NOTE
. Press the rear lock button ten times to enter“ 0”.
. Change the PIN code frequently to protect your vehicle from theft.
. If you have lent your vehicle to another person, confirm that the PIN code has not been changed or deleted. If the PIN code has been changed or deleted, reregister a new PIN code.
. If you make an error during the registration procedure, press the“” or“” button on the access key fob. Then start over from step 1.
. To protect your vehicle from theft, you cannot register“ 00000” to“ 99999” or“ 12345” as a PIN code.
. Do not register your vehicle license plate number or simple numbers such as“ 11122” or“ 12121” as a PIN code. Doing so will increase the risk of vehicle theft.
. When you try to register“ 22222”, the registered PIN code will be deleted. You cannot unlock the doors by PIN Code Access until a new code is registered.
. After registering a new PIN code, make sure that you can unlock the doors using the PIN code.
|
. The PIN code cannot be deleted while the keyless access function is disabled by operating the access key fob.
. Reregister the PIN code in the following case. – When you forget the PIN code – When you want to change the PIN code
! Unlocking s02ap2103
Perform steps( 1) to( 5) of step 5 described in“ Registration for a PIN code”.
NOTE
. You cannot unlock by PIN Code Access in the following cases. – When the access key fob is within the operating ranges – When the ignition switch is in the
“ ACC” or“ ON” position
. If you make an operation error during the unlocking procedure, start over with the unlocking procedure after waiting for 5 seconds or longer.
. To protect your vehicle from theft, a buzzer will sound if incorrect PIN codes are entered five times continuously. If this occurs, you cannot unlock the doors by PIN Code Access for 5 minutes.
|
& Power Saving Function s02ap23
To protect the access key fob battery and the vehicle battery, the keyless access function will be disabled as follows.
. When the keyless access function and the remote keyless entry system have not been used:( 1) 5 days after the push-button ignition switch has been turned off, communication between the antennas and the access key fob will be stopped.
( 2) 9 days after step( 1), the sensors( both lock sensor and unlock sensor) on the front passenger’ s door will be disabled.
. When the access key fob has been left in the operating range for 10 minutes or longer while all doors are locked, the keyless access function will be disabled.
! Recovery from power saving mode s02ap2301
When one of the following operations is performed, the keyless access function will be recovered.
. Unlock by gripping the door handle( only when the sensors on the front passenger’ s door are not disabled) or pressing rear gate opener button on the rear gate.
|
2
Keys and Doors
|
|||
– CONTINUED – |