|
waves are emitted and may affect the operation of the airplane. In a bag, take measures to prevent the buttons from being pressed accidentally.
NOTE
. The operational / non-operational setting for the keyless access function can be changed. For the setting procedure, refer to“ Disabling Keyless Access Function” FP116.
. For detailed information about the operation method for the push-button ignition switch while the keyless access function is switched to the non-operational mode, refer to“ Access Key Fob – If Access Key Fob Does Not Operate Properly” FP426.
. The keyless access with push-button start system uses weak radio waves. The status of the access key fob and environmental conditions may interfere with the communication between the access key fob and the vehicle under the following conditions, and it may not be possible to lock or unlock the doors or start the engine. – When operating near a facility where strong radio waves are
|
transmitted, such as a broadcast station and power transmission lines.
– When products that transmit radio waves are used, such as an access key fob or a remote transmitter key of another vehicle.
– When carrying the access key fob of your vehicle together with the access key fob or the remote transmitter of another vehicle.
– When the access key fob is placed near wireless communication equipment such as a cell phone.
– When the access key fob is placed near a metallic object. – When metallic accessories are attached to the access key fob.
– When carrying the access key fob with an electronic appliance such as a laptop computer.
– When the battery of the access key fob is discharged.
. The access key fob is always communicating with the vehicle and is continuously using the battery. Although the life of the battery varies depending on the operating conditions, it is approximately 1 to 2 years. If the battery becomes fully discharged
|
, replace it with a new one.
. If an access key fob is lost, it is recommended that all of the remaining access key fobs be reregistered. For reregistration of an access key fob, contact a SUBARU dealer.
. For a spare access key fob, contact a SUBARU dealer.
. Up to 7 access key fobs can be registered for one vehicle.
. Do not leave the access key fob in the storage spaces inside the vehicle, such as the door pocket, dashboard or inside the cargo area. Vibrations may damage the key fob or turn on the switch, possibly resulting in a lockout.
. After the vehicle battery is discharged or replaced, initialization of the steering lock system may be required to start the engine. In this case, perform the following procedure to initialize the steering lock.( 1) Turn the push-button ignition switch to the“ OFF” position. For details, refer to“ Switching Power Status” FP149.
( 2) Open and close the driver’ s door.
( 3) Wait for approximately 10 seconds.
|
2
Keys and Doors
|
– CONTINUED – |