Alloy Wheels 465 |
||||
|
tion and may cause the tires to rub against the wheel well housing during turns . The resulting loss of vehicle control could lead to an accident .
NOTE
When any of the wheels are removed and replaced for tire rotation or to change a flat tire , always check the tightness of the wheel nuts after driving approximately 600 miles ( 1,000 km ). If any nut is loose , tighten it to the specified torque .
|
11-17 . Alloy Wheels
s11bm
Alloy wheels can be scratched and damaged easily . Handle them carefully to maintain their appearance , performance , and safety .
. When any of the wheels is removed and replaced for tire rotation or to change a flat , always check the tightness of the wheel nuts after driving approximately 600 miles ( 1,000 km ). If any nut is loose , tighten it to the specified torque .
. Never apply oil to the threaded parts , wheel nuts , or tapered surface of the wheel .
. Never let the wheel rub against sharp protrusions or curbs .
. When wheel nuts , balance weights , or the center cap is replaced , be sure to replace them with genuine SUBARU parts designed for alloy wheels .
. When stacking and storing removed tires , place shock-absorbing material between the tires to protect the wheels from becoming scratched .
|
11-18 . Windshield Washer Fluid |
s11ax
Windshield washer fluid warning light
When there is only a small amount of washer fluid remaining , the windshield washer fluid warning light will appear . When this occurs , refill the washer fluid as follows .
|
Maintenance and Service
11
|
– CONTINUED – |