. When the vehicle has stopped with the brake pedal depressed . |
|||
Braking power is maintained temporarily ( for approximately 2 seconds ) by the Hill start assist system after the brake pedal is released . The driver is therefore able to start the vehicle in the same way as on a level grade , just using the accelerator pedal . |
|||
If the braking power of the Hill start assist system is insufficient after the brake pedal is released , apply more braking power by depressing the brake pedal again . |
|||
|
1 Starting forward facing uphill 2 Starting backward facing downhill A Brake pedal
In both these cases , the Hill start assist system operates under the following condition .
|
The Hill start assist system may not operate on slight grades . Also , the Hill start assist system does not operate in the following cases . |
. When starting backward facing uphill . When starting forward facing downhill . While the parking brake is applied
. While the ignition switch is in the “ ACC ” or “ OFF ” position
. While the Vehicle Dynamics Control
|
7
Starting and Operating
|
– CONTINUED – |