11-38 Maintenance and service / Installation of accessories
If any lights , accessories or other electrical controls do not operate , inspect the corresponding fuse . If a fuse has blown , replace it .
1 . Turn the ignition switch to the “ LOCK ”/ “ OFF ” position and turn off all electrical accessories .
2 . Remove the cover .
3 . Determine which fuse may be blown . Look at the back side of each fuse box cover .
Installation of accessories
S11BD
Always consult your SUBARU dealer before installing fog lights or any other electrical equipment in your vehicle . Such accessories may cause the electronic system to malfunction if they are incorrectly installed or if they are not suited for the vehicle .
The fuse puller is stored in the main fuse box in the engine compartment .
Pinch the upper part of the fuse puller when removing it from the main fuse box .
4 . Pull out the fuse with the fuse puller .
5 . Inspect the fuse . If it has blown , replace it with a spare fuse of the same rating .
6 . If the same fuse blows again , this indicates that its system has a problem . Contact your SUBARU dealer for repairs .