In case of emergency / Maintenance tools 9-5
& Using the jack
S09AH14
1 . Park on a hard , level surface , whenever possible , then stop the engine .
2 . Apply the parking brake securely and shift the shift lever in reverse ( MT models ) or the select lever to the “ P ” ( Park ) position ( CVT models ).
3 . Turn on the hazard warning flasher and unload all occupants and luggage from the vehicle .
Jack-up points ( type A models )
Turn the jackscrew by hand until the jack head engages firmly into the jack-up point .
4 . Put wheel blocks at the front and rear of the tire diagonally opposite the tire that you are going to replace .
5 . Take out the jack , jack handle and wheel nut wrench .
Jack-up points ( type B models )
6 . Place the jack under the side sill at the front or rear jack-up point closest to the tire that you are going to replace .
– CONTINUED –