Starting and operating / Vehicle Dynamics Control system 7-39
& Vehicle Dynamics Control system monitor
S07AN01
Refer to “ Vehicle Dynamics Control warning light / Vehicle Dynamics Control operation indicator light ” F3-23 and “ Vehicle Dynamics Control OFF indicator light ” F3- 24 .
& Vehicle Dynamics Control OFF switch
S07AN02
Vehicle Dynamics Control OFF switch
Press the Vehicle Dynamics Control OFF switch to deactivate the Vehicle Dynamics Control system . Creating adequate driving wheel slip by deactivating the Vehicle Dynamics Control system may help to recover from the loss of traction . Use the Vehicle Dynamics Control OFF switch as
necessary .
. A standing start on a steeply sloping road with a snowy , gravel-covered , or otherwise slippery surface
. Extrication of the vehicle when its wheels are stuck in mud or deep snow
Vehicle Dynamics Control OFF indicator light
When the switch is pressed during engine operation , the Vehicle Dynamics Control OFF indicator light “ ” on the combination meter illuminates . The Vehicle Dynamics Control system will be deactivated and the vehicle will behave like a model not equipped with the Vehicle Dynamics Control system . When the switch is pressed again to reactivate the Vehicle Dynamics Control system , the Vehicle Dynamics
Control OFF indicator light turns off .
With the Vehicle Dynamics Control system deactivated , traction and stability enhancement offered by Vehicle Dynamics Control system is unavailable . Therefore you should not deactivate the Vehicle Dynamics Control system except under above-mentioned situations .
NOTE
. When the switch has been pressed to deactivate the Vehicle Dynamics Control system , the Vehicle Dynamics Control system automatically reactivates itself the next time the ignition switch is turned to the “ LOCK ”/“ OFF ” position and the engine is restarted . . If the switch is held down for 30 seconds or longer , the indicator light turns off , the Vehicle Dynamics Control system is activated , and the system ignores any further pressing of the switch . To make the switch usable again , turn the ignition switch to the “ LOCK ”/“ OFF ” position and restart the engine . . When the switch is pressed to deactivate the Vehicle Dynamics Control system , the vehicle ’ s running performance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control system . Do not de-
– CONTINUED –