3-44
Instruments and controls / Multi-function display ( black and white )
The journey time indication flashes each time a complete hour has elapsed . If the display is giving a reading other than the journey time , the display switches to the journey time , flashes for 5 seconds , and returns to its original reading each time a complete hour has elapsed .
NOTE
The journey time is reset when the ignition switch is turned to the “ ACC ” or “ LOCK ”/“ OFF ” position .
! Average vehicle speed
1 ) |
When units in miles is selected |
2 ) |
When units in km is selected |
S03BO0905
This display shows the average vehicle speed since the trip meter was last reset .
Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display .
When either of the trip meter displays is reset , the corresponding average vehicle speed value is also reset .
NOTE
When either trip meter display is reset , the average vehicle speed corresponding to that trip meter display is not shown until the vehicle has subsequently covered a distance of 1 mile ( or 1 km ).
! Turn off display of driving information display
S03BO0906
Select the blank space in the menu to exit the driving information display selection .
NOTE
. The average fuel consumption and average vehicle speed are calculated even while the driving information display is not displayed . . Even if you turn off the driving information display , the display will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement .