2-28
Keys and doors / Alarm system
. Locking using the power door locking switch . For details , refer to “ Locking using power door locking switch ” F2- 24 .
NOTE
Security indicator light
. All doors and the rear gate ( 5-door models ) will lock , an electronic chirp will sound once , the hazard warning flashers will flash once , and the security indicator light will start flashing rapidly . . If any of the doors or the rear gate / trunk lid is not fully closed , an electronic chirp sounds five times , the hazard warning flashers flash five times to alert you that the doors ( or the rear gate / trunk lid ) are not properly closed . When you close the door , doors will automatically lock .
5 . Approximately 30 seconds later , the system will enter surveillance state .
When the system is in surveillance state , the security indicator light will then flash slowly ( twice approximately every 2 seconds ), indicating that the system has been armed for surveillance .
NOTE
. The system can be armed even if the windows and / or moonroof are open . Always make sure that they are fully closed before arming the system . . The 30-second standby time can be eliminated if you prefer . Have it performed by your SUBARU dealer . . For sedan , if you open the trunk using the access key fob / remote transmitter ’ s “ ” button with the alarm system armed , the system will be temporarily placed in a standby state . The system will go back to the surveillance state upon locking the trunk . . If any of the following actions is done during the standby period , the system will not switch to the surveillance state .
– Doors ( including the rear gate /
trunk lid ) are unlocked using the access key fob / remote transmitter . – Doors ( including the rear gate / trunk lid ) are unlocked using the keyless access function ( models with “ keyless access with pushbutton start system ”). – Any door ( including the rear gate / trunk lid ) is opened . – The ignition switch is turned to the “ ON ” position ( models without “ keyless access with push-button start system ”). – Push-button ignition switch is turned to the “ ACC ” position ( models with “ keyless access with pushbutton start system ”).
& Disarming the system
S02AF05
Perform either of the following procedures .
. Briefly press a button ( for less than 2 seconds ) on the access key fob / remote transmitter .
. Carry the access key fob and perform either of the following procedures ( models with “ keyless access with push-button start system ”). – Grip the front door handle . – Press the rear gate opener button ( 5-door models ). – Unlock using the PIN code access .