CAUTION
� If your vehicle is washed with a high-pressure washer, do not allow water to contact the camera directly. Water entering the camera may cause condensation on the inside of the camera lens, damage and malfunction of the camera.
� Since the camera is a precision device, do not subject it to ������� ��������� ����������� ������������� ���� ��� ��������� ������ may occur.
� If mud or snow sticks to the camera, or it freezes up, you must be very careful when removing it. Pour water or lukewarm water over the camera to remove mud and ice, and wipe it with a soft, dry cloth.
� Do not try to melt snow or ice off of the camera using heat. Otherwise, damage to the camera may occur.
� When replacing the fuse, be sure to use a fuse with the ����������������������������������������������������������������� in a malfunction.
� If the rear view camera is used for a long time while the engine is not operated, the battery may become completely discharged.
NOTE
� Do not wipe the cam Otherwise, discolora wipe the camera wit detergent and then w
� When waxing the veh camera. If it comes i cloth with a diluted ne
� The camera lens has However, when wash be careful not to scra brush directly on the view camera may det
� Strong light shined lines around the light
� �������������������� not a malfunction. � The image of the rea the actual color of the