11-46 Maintenance and service / Replacing key battery
Replacing key battery
S11BK
The access key fob / transmitter battery may be discharged under the following conditions.
. The operation of the keyless access function is unstable
. The operating distance of the remote keyless entry system is unstable
. The transmitter does not operate properly when used within the standard distance
Replace the battery with a new one.
& Safety precautions CAUTION
S11BK04
. Do not let dust, oil or water get on or in the access key fob / transmitter when replacing battery.
. Before replacing the battery, remove any static electricity.
. Be careful not to touch or damage the printed circuit board in the access key fob / transmitter when replacing the battery.
. Be careful not to allow children to touch the battery and any removed parts; children could swallow them.
. There is a danger of an explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type of the battery.
. Batteries should not be exposed to excessive heat such as bright sunlight, fire or the like.
NOTE
. Replace only with the same or equivalent type of battery recommended by the manufacturer.. Dispose of used batteries according to local laws.. Mount the battery in the correct orientation to prevent fluid leakage. Be careful not to bend the terminals. It may result in a malfunction.. It is recommended that the battery be replaced by a SUBARU dealer.. Use a new battery.. After replacing the battery, confirm that the transmitter functions properly.
& Replacing battery of access key fob
S11BK01
CAUTION
When removing or reinstalling the access key fob cover, make sure that the plastic part does not come off or become misaligned.
Battery: Button battery CR2032
1) |
Release button |
2) |
Emergency key |
1. Take out the emergency key.