In case of emergency/Maintenance tools
9-5
& Using the jack
S09AH14
1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Apply the parking brake securely and
shift the shift lever in reverse (MT models)
or the select lever to the “P” (Park) position
(CVT models).
3. Turn on the hazard warning flasher and
have everyone get out of the vehicle.
Jack-up points (type A models)
4. Put wheel blocks at the front and rear
of the tire diagonally opposite the tire that
you are going to replace.
5. Take out the jack and jack handle.
Turn the jackscrew by hand until the jack
head engages firmly into the jack-up point.
Jack-up points (type B models)
6. Place the jack under the side sill at the
front or rear jack-up point closest to the tire
that you are going to replace.
– CONTINUED –