7-44
Starting and operating/Hill start assist system
NOTE
If you make an error when performing
any steps in the following procedure,
place the ignition switch in the “LOCK”/
“OFF” position once and then start
over again.
(3) The Vehicle Dynamics Control
OFF indicator light turns off.
(4) The ABS warning light turns off.
! To deactivate
S07AU0201
1. Park your vehicle in a flat and safe
location and apply the parking brake.
2. Turn the ignition switch to the “LOCK”/
“OFF” position.
3. Restart the engine.
Hill start assist OFF indicator
Vehicle Dynamics Control OFF switch
5. Press and hold the Vehicle Dynamics
Control OFF switch for 30 seconds until
the Vehicle Dynamics Control OFF indica-
tor light “ ” on the combination meter turns
on and off.
6. Within 5 seconds, release the Vehicle
Dynamics Control OFF switch.
4. Confirm the following items.
(1) The brake system warning light
illuminates.
(2) The Vehicle Dynamics Control
warning light turns off.
7. Within 2 seconds, press back the
Vehicle Dynamics Control OFF switch.
The Hill start assist OFF indicator light
turns on and off.
8. Turn the ignition switch to the “LOCK”/
“OFF” position. Hill start assist is deacti-
vated.
NOTE
When the Hill start assist system is
deactivated, the Hill start assist OFF
indicator light illuminates.