Instruments and controls/Headlight beam leveler (models with LED headlights)
The SRH OFF indicator on the combina-
tion meter illuminates when SRH is turned
off. Headlight beam leveler
(models with LED headlights)
If SRH is malfunctioning, the SRH OFF
indicator on the combination meter flashes
when the ignition switch is in the “ON”
position. It indicates that SRH has been
deactivated. Contact a SUBARU dealer for
an inspection. The LED headlights produce more light
than conventional halogen headlights.
When the vehicle is carrying a heavy load
and the headlight beams are angled
upwards, the driver of an oncoming vehicle
may experience glare.
To prevent this, the automatic headlight
beam leveler adjusts the headlights to the
optimum height automatically depending
on the load the vehicle is carrying.
NOTE
. If you turn the ignition switch to the
“OFF” position with SRH turned off and
then start the engine again, SRH will
automatically turn on.
. When you turn the ignition switch to
the “ON” position, the SRH OFF indi-
cator will illuminate and turn off after
several seconds.
. SRH only activates when the vehicle
is traveling forward at the speed of
approximately 5 mph (8 km/h) or more.
. SRH may not activate when the shift
lever (MT models) is selected in 1st
gear.
3-73
Fog light switch (if equipped)
S03BA
S03AT
1)
2)
Headlight switch
Fog light switch
The front fog lights will turn on when the
fog light switch is placed in the “ ” position
while the headlights are in the following
condition.
. while the headlight switch is in the “ ”
position
. for models with the auto on/off head-
lights, while the headlight switch is in the
“AUTO” position and the low beam head-
lights turn on automatically
To turn off the front fog lights, turn the
switch back down to the “ ” position.
– CONTINUED –