Instruments and controls/Ignition switch (models without “keyless access with push-button start system”)
CAUTION
3-5
. The engine may not start in the
following cases:
Do not turn the ignition switch to the
“START” position while the engine
is running.
NOTE
– The key grip is touching another
key or a metallic key holder.
– The key is near another key that
contains an immobilizer transpon-
der.
– The key is near or touching
another transmitter.
& Key reminder chime
S03AA05
. To turn the key from the “ACC” to
“LOCK” position, the select lever must
be in the “P” position (CVT models) and
the key must be pushed in and turned.
. If your registered key fails to start
the engine, pull out the key once (the
security indicator light will blink), and
then insert the key again and turn it to
the “START” position again to restart
the engine.
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “ACC” position.
The chime stops under the following
conditions.
. when the ignition switch is turned to the
“ON” position
. when the key is removed from the
ignition switch
. when the driver’s door is closed
– CONTINUED –