Keys and doors / Alarm system 2-27
NOTE
. The default setting for this function is set as“ operational”. The operational / non-operational setting of this function can be changed by a SUBARU dealer. Contact your SUBARU dealer to change the setting.. When leaving the vehicle, please make sure that all doors and the rear gate( 5-door models) are completely closed.. The battery drainage prevention function does not operate while the key is in the ignition switch.
Alarm system
S02AF
The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the hazard warning flashers flash if someone attempts to break into your vehicle.
For models with“ keyless access with push-button start system”:
The system can be armed or disarmed with the keyless access function or access key fob.
The system will not be activated when the push-button ignition switch is in the“ ACC” or“ ON” position.
For models without“ keyless access with push-button start system”:
The system can be armed or disarmed with the remote transmitter.
The system will not be activated when the key is inserted into the ignition switch.
Your vehicle’ s alarm system has been set for activation at the time of shipment from the factory. You can set the system for deactivation yourself or have it done by your SUBARU dealer.
& Alarm system operation
S02AF01
When the alarm system is armed, it is triggered by the opening any of the doors, the rear gate( 5-door models) or trunk lid( sedan).
The alarm system will activate the following alarms when triggered.
. The vehicle’ s horn will sound for 30 seconds.
. The hazard warning flashers will flash for 30 seconds.
If any of the doors or the rear gate / trunk lid remains open after the 30-second period, the horn will continue to sound for a maximum of 3 minutes. If the door or the rear gate / trunk lid is closed while the horn is sounding, the horn will stop sounding with a delay of up to 30 seconds.
NOTE
The alarm system can be set to trigger the illumination of the following interior lights.
. Map lights( illuminates only when the map lights switch is in the“ DOOR” position). Dome light( illuminates only when the dome light switch is in the“ DOOR” position)
– CONTINUED –