2-12
Keys and doors/Keyless access with push-button start system
& Unlock using PIN Code Ac-
cess
S02AP21
When all doors including the rear gate (5-
door models) are locked, you can unlock
the doors (including rear gate) without a
key by performing the following procedure.
. Sedan: press the trunk opener button
. 5-door models: press the rear lock
button
1)
Rear lock button (5-door models)
NOTE
NOTE
PIN Code Access will be helpful if the
key fob is accidentally left in the
vehicle. It is recommended that a 5-
digit security code (PIN code) be regis-
tered.
1)
Trunk opener button (sedan)
lock button (5-door models) within 5
seconds after step 3.
5. Press and hold the trunk opener button
(sedan)/rear lock button (5-door models)
for more than 5 seconds. Confirm a chirp
sound.
6. Release the “ ” button and trunk
opener button (sedan)/rear lock button
(5-door models).
7. Press the “ ” button on the access key
fob while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
! Preparation for registering a PIN
code
S02AP2101
1. Turn off the ignition switch.
2. Close all doors (including trunk/rear
gate).
3. Press and hold the “ ” button on the
access key fob. Then all doors (including
rear gate) will be locked.
4. Keep the “ ” button pressed, and
press the trunk opener button (sedan)/rear
Press the “ ” button within 30 seconds
of step 6 to end the preparation mode
and move on to the registration stage.
Unless the “ ” button is pressed within
30 seconds after step 6, the PIN code
registration will be canceled.
! Registration for a PIN code
S02AP2102
For example, to register “32468” as the
PIN code, perform the following proce-
dure.
1. Press the trunk opener button (sedan)/
rear lock button (5-door models) three
times.
2. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock