Starting and operating/Reverse Automatic Braking System
! After the vehicle is stopped by the
system
sound (3 short beeps followed by a
long beep) will activate to alert the
driver that the automatic will be re-
leased.
& Canceling the Reverse Auto-
matic Braking system opera-
tion
1)
Reverse Automatic Braking system OFF
indicator
After the brake pedal is depressed, the
Reverse Automatic Braking system OFF
indicator will illuminate and the system will
temporarily stop operating. The Reverse
Automatic Braking system OFF indicator
will turn off when the select lever is shifted
to a position other than the “R” position.
The system will operate again the next
time the select lever is shifted to “R”
position.
NOTE
Automatic braking only holds the ve-
hicle for 2 seconds. Before the auto-
matic brake is released, a warning
The Reverse Automatic Braking system
can be temporarily canceled by any of the
following operations.
. While the vehicle is stopped by the
operation of automatic braking, the brake
pedal is depressed
. While the vehicle is stopped by the
operation of automatic braking, the accel-
erator pedal is depressed
. The accelerator pedal is depressed
hard (In this case, limited acceleration will
be canceled and the vehicle will continue
reversing.)
. The select lever is shifted to a position
other than the “R” position
NOTE
The system will be canceled if the
object is no longer detected.
7-63
& Reverse Automatic Braking
system ON/OFF setting
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking system can be
set by operating the audio/navigation
monitor.
1)
2)
3)
4)
ON setting key of Reverse Automatic
Braking
OFF setting key of Reverse Automatic
Braking
ON setting key of the object detection
warning beeping sound
OFF setting key of the object detection
warning beeping sound
When the ON setting key is shown, the
corresponding setting is ON.
Touch and hold the ON setting key to turn
the setting OFF.
– CONTINUED –