Instruments and controls/Clock
! Setting 12-hour or 24-hour dis-
play
The clock can be set to 12-hour or 24-hour
display. Perform the following procedure
to switch the display format.
1. Place the ignition switch in the
“LOCK”/“OFF” position.
2. Press and hold the “−” button located
near the clock display for approximately 5
seconds. The clock display will then start
to flash.
3. While the clock display is flashing,
press and hold the “+” button for approxi-
mately 2 seconds. The clock format will
then change.
4. The clock display will continue to flash
for approximately 3 seconds to inform that
the clock display has been changed.
! Type B multi-function display (color
LCD)
3-65
& Regulatory information
The Bluetooth ® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.
! Adjusting the clock
1. Select “Time/Date” from the 2nd menu
of the setting screen. Refer to “Setting
screen” F3-58.
2. Use the control switch to set the date,
time and 12-hour or 24-hour format.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without changing the settings.
NOTE
The Birthday/Anniversary and mainte-
nance reminder system function based
on the time and date on the multi-
function display (color LCD).