Instruments and controls/Warning and indicator
Inside warning
chime
Long beep
(continuous)
Long beep
(continuous)
Outside warning
chime
Long beep
(continuous)
—
Operation indicator
on push-button igni-
tion switch
Status
3-29
Action
— Access key takeout without P position
warning (CVT models):
The driver exited the vehicle with the
Shift the select lever to the “P” position,
access key fob and closed the driver’s
switch the push-button ignition switch to
door while the push-button ignition switch “OFF” and exit the vehicle.
is in a position other than “OFF” and the
select lever is in a position other than the
“P” position.
— Select lever position warning (CVT
models):
The engine is turned off by pressing the
push-button ignition switch and the select
lever is in a position other than the “P”
position.
Start the engine, shift the select lever to
the “P” position, switch the push-button
ignition switch to “OFF” and exit the
vehicle.
Long beep
(continuous) — — Select lever position warning (CVT
models):
Shift the select lever to the “P” position,
The driver’s door was opened while the switch the push-button ignition switch to
push-button ignition switch is in a position “OFF” and exit the vehicle.
other than “OFF” and the select lever is in
a position other than the “P” position.
Ding — — The battery of the access key fob is low. Replace the battery of the access key fob.
Ding — Flashes in green
(15 seconds max.) Steering lock warning:
The engine start procedure was per-
formed, but the steering is still locked.
Ding — Flashes in orange
(15 seconds max.) System malfunction warning:
Contact a SUBARU dealer immediately
A malfunction was detected in the power and have the vehicle inspected.
system or steering lock.
While turning the steering wheel right and
left lightly, depress the brake pedal and
press the push-button ignition switch.
– CONTINUED –