Instruments and controls/Push–button ignition switch (models with “keyless access with push–button start system”)
issue although no malfunction actually
occurs, or not to issue a warning when
any malfunction occurs.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (sedan)
– Inside the trunk (sedan)
– In the cargo area (5-door models)
. When operating the push-button
ignition switch or starting the engine,
if the access key fob battery is dis-
charged, perform the procedure de-
scribed in “Access key fob – if access
key fob does not operate properly” F9-
18. In such a case, replace the battery
immediately. Refer to “Replacing bat-
tery of access key fob” F11-45.
& Switching power status
switch illuminates in orange.
Power
status Indicator color Operation
OFF Turned off Power is turned
off.
Orange The following
systems can be
used:
audio and ac-
cessory power
outlet.
ACC
1)
2)
Operation indicator
Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Shift the select lever (CVT models)/the
shift lever (MT models) into the “P”/“N”
position.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of “OFF”,
“ACC”, “ON” and “OFF”. When the engine
is stopped and the push-button ignition
switch is in “ACC” or “ON”, the operation
indicator on the push-button ignition
3-7
ON
Orange
(while engine is
stopped)
Turned off
(while engine is
running)
All electrical
systems can be
used.
CAUTION
. When the push-button ignition
switch is left in “ON” (while the
engine is not running) or “ACC”
for a long time, it may result in
vehicle battery discharge.
. Do not spill drinks or other
liquids on the push-button igni-
tion switch. It may cause a mal-
function.
. Do not touch the push-button
ignition switch with a hand soiled
– CONTINUED –