Keys and doors/Keyless access with push–button start system
registration will be canceled.
! Registration for a PIN code
For example, to register “32468” as the
PIN code, perform the following proce-
dure.
1. Press the trunk opener button (sedan)/
rear lock button (5-door models) three
times.
2. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock
button (5-door models) twice.
3. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock
button (5-door models) four times.
4. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) six times.
5. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the chirp
starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
NOTE
. Press the trunk opener button (se-
dan)/rear lock button (5-door models)
ten times to enter “0”.
. Change the PIN code frequently to
protect your vehicle from theft.
. If you have lent your vehicle to
another person, confirm that the PIN
code has not been changed or deleted.
If the PIN code has been changed or
deleted, reregister a new PIN code.
. If you make an error during the
registration procedure, press the “ ”
or “ ” button on the access key fob.
Then, start over from the procedure
described in “Preparation for register-
ing a PIN code”.
. To protect your vehicle from theft,
you cannot register a string of the
same five numbers together, such as
“00000”, nor “12345” as a PIN code.
. Do not register your vehicle license
plate number or simple numbers such
as “11122” or “12121” as a PIN code.
Doing so will increase the risk of
vehicle theft.
. When you try to register “22222”,
the registered PIN code will be deleted.
You cannot unlock the doors by PIN
Code Access until a new code is
registered.
. After registering a new PIN code,
2-13
make sure that you can unlock the
doors using the PIN code.
. The PIN code cannot be deleted
while the keyless access function is
disabled by operating the access key
fob.
. Reregister the PIN code in the
following case.
– when you forget the PIN code
– when you want to change the PIN
code
! Unlocking
Perform steps 1 to 5 described in “Regis-
tration for a PIN code”.
NOTE
. You cannot unlock by PIN Code
Access in the following cases.
– when the access key fob is within
the operating ranges
– when the ignition switch is in the
“ACC” or “ON” position
. If you make an operation error
during the unlocking procedure, start
over with the unlocking procedure after
waiting for 5 seconds or longer.
. To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
– CONTINUED –