Conventional Cruise Control
● Automatic cancellation by the system
In the following cases, a buzzer sounds 1 short beep and 1 long beep and the Cruise control
function is automatically canceled. (
changes from green to white.) Also, the Conventional Cruise Control cancellation message is displayed on the screen.
After the conditions listed below have been
eliminated, perform the cruise control set
operation again to reactivate cruise control.
x The select lever was moved to a position
other than D or M .
(White)
S02498
x Vehicle speed drops to approximately 20 MPH (30 km/h) or less (due to a steep uphill
grade or some other reason).
x Vehicle speed rises to approximately 100 MPH (160 km/h) or more.
x The ABS, Vehicle Dynamics Control or Traction Control functions activate.
x Any door (except the rear gate/trunk) was opened.
x The driver’s seatbelt is unfastened.
x EyeSight is malfunctioning. (Refer to page 86, “EyeSight malfunction and temporary
stop”.)
x The steering wheel is turned significantly in either direction.
x The grade of the road is steep.
x The Pre-Collision secondary braking has activated.
x Parking brake is applied.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may
result in an accident.
81