About EyeSight
(CRUISE) switch
■
x Switches cruise control* on/off.
x When this switch is pressed “
” or “
” appears on the EyeSight display area in the
combination meter display. This indicates that the main cruise control is turned on.
Refer to pages 39 and 75.
x Can be used to cancel the cruise control.
Refer to pages 47 and 80.
* Adaptive Cruise Control and Conventional Cruise Control
■ RES/SET switch
● SET/x Can be used to set cruise control*.
x Can be used to reduce the set vehicle speed (when cruise control* is currently set).
Refer to pages 40 and 44 (for Adaptive Cruise Control).
Refer to pages 77 and 79 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
● RES/+
x Can be used to set cruise control*.
x After cruise control* is canceled, this switch can be used to resume the cruise control
function at the vehicle speed that was previously set.
x Can be used to increase set vehicle speed (when cruise control* is currently set).
Refer to pages 43 and 50 (for Adaptive Cruise Control).
Refer to page 83 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
■
/
(Following distance setting) switch
x Can be used to switch the set following distance in 4 stages: (only when Adaptive Cruise
Control is on).
Refer to page 46.
x When the
(CRUISE) switch is on, switching between Adaptive Cruise Control and
Conventional Cruise Control is possible by pressing the
/
(Following distance
setting) switch*.
* To switch to Conventional Cruise Control, press and hold the switch for approximately 2
seconds or longer.
■
(Lane Keep Assist) switch
Switches Lane Keep Assist on/off.
Refer to page 57.
18