1-34
Seat, seatbelt and SRS airbags/Child restraint systems
! To install a child restraint system
using lower and tether anchorages
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
3. Remo ve the rear seat head restraint.
For details, refer to “Rear windows side
seating position” F1-8.
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– It is possible to check whether the
seatback is locked visually. If the
seatback is locked into place, the red
colored unlocking marker which is
attached to the bottom of the lock
release knob is invisible. For details,
refer to “Folding down the rear seatback” F1-9.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower anchorages (bars).
Remove the covers and locate the lower
anchorages (bars).
4. While following the instructions supplied by the child restraint system manufacturer, connect the lower hooks onto the
lower anchorages located at “ ” marks on
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.