Keys and doors/Keyless access with push–button start system
function will be disabled.
! By operating the driver’s door
1. Sit in the driver’s seat, and close the
door.
2-19
twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door.
A chirp sound will be heard, and the
functions will be disabled.
NOTE
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
2. Rotate the lock lever forward.
3. Press and hold the “ ” button and
“ ” button on the access key simultaneously for more than 5 seconds.
A chirp sound will be heard, and the
2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
6. Within 10 seconds after step 5 is
performed, push the rear side (unlock
side) of the power door locking switch
! Enabling functions
When the procedure to disable the functions is performed again, a chirp sound will
be heard, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the procedure in the same manner you disabled
the function (for example, when disabling by operating the driver’s door,
the function will not be enabled even if
you operate the access key).
. Press the push-button ignition
switch if you do not know the procedure in which the keyless access
function was disabled.
– CONTINUED –