Instruments and controls/Warning and indicator lights
. The light does not turn off even once
several seconds have elapsed after the
ignition switch has been turned to the
“ON” position.
example, an unauthorized duplicate) is
used, the security indicator light illuminates. For details about the immobilizer
system, refer to “Immobilizer” F2-2.
& Security indicator light
3-21
& Select lever/gear position indicator (CVT models)
NOTE
This indicator light shows the status of the
alarm system. It also indicates operation
of the immobilizer system.
! Alarm system
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to “Alarm system” F210.
! Immobilizer system
The security indicator light starts blinking
in the following conditions.
. approximately 60 seconds after the
ignition switch is turned from the “ON”
position to the “ACC” or “LOCK” (off)
position
. immediately after the ignition key is
pulled out
If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunctioning. Contact your nearest SUBARU dealer
immediately.
. The security indicator light remains
off in the following conditions. This is
normal and does not indicate a malfunction.
– while the engine is running
– for approximately 60 seconds
after the ignition switch is turned
from the “ON” position to the
“ACC” or “LOCK” (off) position
. Even if the security indicator light
blinks irregularly or its fuse blows (the
light does not blink if its fuse is blown),
the immobilizer system will function
normally.
1)
2)
Upshift indicator
Downshift indicator
This indicator shows the position of the
select lever.
For models with manual mode, when the
manual mode is selected, the gear position indicator (which shows the current
gear selection) and the upshift/downshift
indicator light up. Refer to “Continuously
variable transmission” F7-19.
In the event that an unauthorized key (for
– CONTINUED –