Instruments and controls/Warning and indicator lights
CAUTION
Continuing to drive with the AWD
warning light blinking can damage
the powertrain. If the AWD warning
light starts to blink, promptly park in
a safe place and check whether the
tires have differing diameters and
whether any of the tires has an
excessively low inflation pressure.
& Power steering warning light
This warning light illuminates when the
ignition switch is turned to the “ON”
position and turns off after the engine
has started. This indicates that the warning system is working properly.
While the engine is running, this warning
light illuminates when a malfunction has
been detected in the electric power steering system.
CAUTION
When the power steering warning
light is illuminated, there may be
more resistance when the steering
wheel is operated. Drive carefully to
the nearest SUBARU dealer and
have the vehicle inspected immediately.
NOTE
If the steering wheel is operated in the
following ways, the power steering
control system may temporarily limit
the power assist in order to prevent the
system components, such as the control computer and drive motor, from
overheating.
. The steering wheel is operated frequently and turned sharply while the
vehicle is maneuvered at extremely low
speeds, such as while frequently turning the steering wheel during parallel
parking.
. The steering wheel remains in the
fully turned position for a long period
of time.
At this time, there will be more resistance when steering. However this is
not a malfunction. Normal steering
force will be restored after the steering
wheel is not operated for a while and
the power steering control system has
an opportunity to cool down. However,
if the power steering is operated in a
non-standard way which causes power
assist limitation to occur too frequently, that may result in a malfunc-
3-19
tion of the power steering control
system.
& Vehicle Dynamics
Control warning light/
Vehicle Dynamics Control operation indicator
light
! Vehicle Dynamics Control warning
light
CAUTION
The Vehicle Dynamics Control system provides its ABS control
through the electrical circuit of the
ABS system. Accordingly, if the ABS
is inoperative, the Vehicle Dynamics
Control system becomes unable to
provide ABS control. As a result, the
Vehicle Dynamics Control system
also becomes inoperative, causing
the warning light to illuminate.
Though both the Vehicle Dynamics
Control and ABS systems are inoperative in this case, the ordinary
functions of the brake system are
still available. You will be safe while
driving with this condition, but drive
carefully and have your vehicle
– CONTINUED –