In case of emergency/Flat tires
8. Loosen the wheel nuts using the wheel
nut wrench but do not remove the nuts.
1)
2)
9-7
Turn the jackscrew by hand until the jack
head engages firmly into the jack-up point.
Notch
Valve hole
7. If your vehicle has wheel covers, insert
a flat-head screwdriver into the notch on
the opposite side of the valve hole and pry
the wheel cover to remove it.
Jack-up points
9. Place the jack under the side sill at the
front or rear jack-up point closest to the flat
tire.
10. Insert the jack handle into the jackscrew, and turn the handle until the tire
clears the ground. Do not raise the vehicle
higher than necessary.
11. Remove the wheel nuts and the flat
tire.
– CONTINUED –