3-66
Instruments and controls
Turn signal lever
Illumination brightness control
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the automatic dimming function does not work
at all.
. The brightness setting is not canceled even when the ignition switch is
turned to the “LOCK” position.
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
The illumination brightness of the instrument panel dims under the following
conditions.
. when the light switch is in the “
” or
“ ” position
. when the light control switch is in the
“AUTO” position and the headlights illuminate automatically (models with auto o