Instruments and controls
Light control switch
3-63
& Headlights
CAUTION
7. The system will notify you that the
setting is complete for approximately 3
seconds.
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the “ ” (off) position.
If the vehicle is left unattended
for a long time with the light
control switch set to a position
other than “ ” (off) position, the
battery may be discharged.
NOTE
. Even if the key is removed from the
ignition switch, the lights can be illuminated by operating the light control
switch from the “ ” (off) position to the
“
” or “ ” position.
. If the driver’s door is opened while
the lights are illuminated and the key is
removed from the ignition switch, the
chirp sound informs the driver that the
lights are illuminated.
To turn on the headlights, turn the knob on
the end of the turn signal lever.
“ ” position
Instrument panel illumination, headlights,
parking lights, front side marker lights, rear
side marker lights, tail lights and license
plate lights are on.
“
” position
Instrument panel illumination, parking
lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights are on.
– CONTINUED –