3-4
Instruments and controls
(all models).
NOTE
& ACC
The engine may not start in the following cases:
In this position the electrical accessories
(audio, accessory power outlet, etc.) can
be used.
& Key reminder chime
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “ACC” position.
& ON
This is the normal operating position after
the engine is started.
& START
The engine is started in this position. The
starter cranks the engine to start it. When
the key is released (after the engine has
started), the key automatically returns to
the “ON” position.
contains an immobilizer transponder.
. The key is near or touching another
transmitter.
. The key grip is touching another key
or a metallic key holder.
CAUTION
The chime stops under the following
conditions.
. when the ignition switch is turned to the
“ON” position
. when the key is removed from the
ignition switch
. when the driver’s door is closed
& Ignition switch light (if
equipped)
For easy access to the ignition switch in
the dark, the ignition switch light illuminates when the driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless entry transmitter.
Do not turn the ignition switch to the
“START” position while the engine
is running.
If your registered key fails to start the
engine, pull out the key once (the security
indicator light will blink), and then insert
the key in the ignition switch and turn it to
the “START” position and again try to start
the engine.
. The key is near another key that
The light remains illuminated for several
tens of seco